Difference between revisions of "Global Configuration Files"

From Lingoport Wiki
Jump to: navigation, search
(config_email_global.xml)
(Location)
 
(44 intermediate revisions by 2 users not shown)
Line 1: Line 1:
  +
=Location=
= Global File Structure =
 
  +
Global Configuration Files are copied over to the ''L10nStreamlining/config'' folder when LRM is installed for the first time. The original configuration files are located in the ''../lingoport/lrm-server-xx/deploy/templates/dir_structure/glboal'' folder. These files can be moved to the group or project levels if more granularity is needed.
   
  +
Configuration files can be at the global, group or project level.
The global configuration files are located in <code>config</code> directory under the L10n Streamlining directory (typically ~jenkins/Lingoport_Data/L10nStreamlining)
 
  +
  +
'''Global''': <HOME>/Lingoport_Data/L10nStreamlining/config
  +
  +
'''Group''': <HOME>/Lingoport_Data/L10nStreamlining/<group name>/config
  +
  +
'''Project''': <HOME>/Lingoport_Data/L10nStreamlining/<group name>/projects/<project name>/config
  +
  +
If there are duplicate files, the project level takes precedence, followed by the group level, and finally the global level.
  +
  +
= Global File Structure =
  +
The global configuration files are located in '''<code>config</code>''' directory under the L10n Streamlining directory (typically '''<HOME>/Lingoport_Data/L10nStreamlining''')
   
 
<pre>
 
<pre>
Line 10: Line 22:
 
│   ├── config_email_global.xml
 
│   ├── config_email_global.xml
 
│   ├── config_file_cherry_picker.xml
 
│   ├── config_file_cherry_picker.xml
  +
│ ├── config_gl_file_format.properties
  +
│ ├── config_gl_locale_mapping.properties
 
│   ├── config_lingotek_api.properties
 
│   ├── config_lingotek_api.properties
 
│   ├── config_lingotek_file_format.properties
 
│   ├── config_lingotek_file_format.properties
│   ├── sonar-project-template.properties
 
 
│  
 
│  
 
├── <group_name>
 
├── <group_name>
 
│   ├── config
 
│   ├── config
 
│ ...
 
│ ...
│  
+
│  
└── projects
+
└── projects
└── <project 1>
+
└── <project 1>
├── config
+
├── config
...
+
...
  +
├── logs
 
 
</pre>
 
</pre>
   
Line 33: Line 46:
 
== config_attask.properties ==
 
== config_attask.properties ==
   
The '''<code>config_attask.properties</code>''' file is the configuration file for creating an AtTask (Workfront) project that corresponds with a prep kit.
+
The '''config_attask.properties''' file is the configuration file for creating an AtTask (Workfront) project that corresponds with a prep kit.
   
 
Each task under the AtTask project will correspond to one locale in the prep kit. A document listing the changed keys will be uploaded for each task.
 
Each task under the AtTask project will correspond to one locale in the prep kit. A document listing the changed keys will be uploaded for each task.
Line 69: Line 82:
 
== config_email_global.xml ==
 
== config_email_global.xml ==
   
The config_email_global.xml file is the configuration file for setting up the sender's email credentials for all emails that are sent by the LRM process.
+
File '''<code>config_email_global.xml</code>''' is the configuration file for setting up the sender's email credentials for all emails that are sent by the LRM process. It is located in the global '''<code><HOME>/Lingoport_Data/L10nStreamlining/config</code>''' folder.
In addition, there are configuration settings for when to send out notification emails and whether or not to send out the 'No Files to Prep' email.
 
The default settings are:
 
* Notification Email will be sent every week. The notification email lists the locales that need to be prep, the files that will be in the next prep kit as well as all the outstanding prep kits.
 
* Late Prep Kit Email:
 
** Email is sent every week if there are late prep kits
 
** A prep kit is deemed 'late' if it is more than 7 days late
 
*'No Files to Prep' email will be sent out when there is a request to prep a kit but there are no files to prep. If a Jenkins job is created that automatically attempts to prep a kit, then this value should be set so that the email is not sent. Otherwise, the email recipient's inbox may be inundated with 'No Files to Prep' emails.
 
   
  +
The '''config_email_global.xml''' file is used by a project's ''Notifications'' Jenkins job in order to send out status emails. This Jenkins job is, by default, set to run once a week.
This file resides only at the global level.
 
  +
  +
See [[Sending_Emails | Sending Emails]] for more information.
   
 
== config_file_cherry_picker.xml ==
 
== config_file_cherry_picker.xml ==
This is a template file to be copied under the project config directory if needed.
+
The '''config_file_cherry_picker.xml''' file is a template to be copied under the project config directory if needed.
   
 
It helps special situations where files to be sent for translation are far and few and possibly locale dependent. This should be used with care.
 
It helps special situations where files to be sent for translation are far and few and possibly locale dependent. This should be used with care.
  +
  +
This file resides only at the project level but is moved into the project level when it is being used.
   
 
== config_lingotek_api.properties ==
 
== config_lingotek_api.properties ==
This is a configuration file that contains the lingotek api calls and should not be edited. It is used if the L10n vendor for a group/project is set to Lingotek (config_l10n_vendor.properties). Any edits made to this file may cause prep kits to fail when uploading to Lingotek.
+
The '''config_lingotek_api.properties''' file is a configuration file that contains the lingotek api calls and should not be edited. It is used if the L10n vendor for a group/project is set to Lingotek ('''config_l10n_vendor.properties'''). Any edits made to this file may cause prep kits to fail when uploading to Lingotek.
   
 
This file resides only at the global level.
 
This file resides only at the global level.
   
 
== config_lingotek_file_format.properties ==
 
== config_lingotek_file_format.properties ==
This configuration files contains the file format mapping for uploading documents into Lingotek. It is used if the L10n vendor for a group/project is set to Lingotek (config_l10n_vendor.properties).
+
The '''config_lingotek_file_format.properties''' configuration file contains the file format mapping for uploading documents into Lingotek. It is used if the L10n vendor for a group/project is set to Lingotek ('''config_l10n_vendor.properties''').
 
This file resides only at the global level.
 
   
== sonar-project-template.properties ==
 
This file is the default sonar configuration used to push data to the Dashboard.
 
 
This file resides only at the global level.
 
This file resides only at the global level.

Latest revision as of 22:38, 27 November 2018

Location

Global Configuration Files are copied over to the L10nStreamlining/config folder when LRM is installed for the first time. The original configuration files are located in the ../lingoport/lrm-server-xx/deploy/templates/dir_structure/glboal folder. These files can be moved to the group or project levels if more granularity is needed.

Configuration files can be at the global, group or project level.

Global: <HOME>/Lingoport_Data/L10nStreamlining/config

Group: <HOME>/Lingoport_Data/L10nStreamlining/<group name>/config

Project: <HOME>/Lingoport_Data/L10nStreamlining/<group name>/projects/<project name>/config

If there are duplicate files, the project level takes precedence, followed by the group level, and finally the global level.

Global File Structure

The global configuration files are located in config directory under the L10n Streamlining directory (typically <HOME>/Lingoport_Data/L10nStreamlining)

<L10nStreamlining>
├── config
│   ├── config_attask.properties
│   ├── config_custom_tasks.xml
│   ├── config_email_global.xml
│   ├── config_file_cherry_picker.xml
│   ├── config_gl_file_format.properties
│   ├── config_gl_locale_mapping.properties
│   ├── config_lingotek_api.properties
│   ├── config_lingotek_file_format.properties
│   
├── <group_name>
│   ├── config
│       ...
│   │   
│   └── projects
│       └── <project 1>
│          ├── config
│           ...
├── logs

For more information on the project configuration files, visit the Project Configuration Files page.

For more information on the group configuration files, visit the Group Configuration Files page.

Most of the global config files contain information that is consistent throughout all groups and projects.

config_attask.properties

The config_attask.properties file is the configuration file for creating an AtTask (Workfront) project that corresponds with a prep kit.

Each task under the AtTask project will correspond to one locale in the prep kit. A document listing the changed keys will be uploaded for each task.

A template as well as a URL may be attached to each task if configured.

The attributes for setting up AtTask is as follows:

#Required attributes		  
attask.groupid=
attask.ownerid=
attask.url=
attask.login.user=
attask.login.password=
#available tokens ${groupname}, ${projectname}, ${kitversion}, ${sendkitname} ${sendkitid}
attask.project.name.format=${groupname}-${projectname}-${kitversion}

#Non-required attributes
attask.templateid=
#available tokens ${groupname}, ${projectname}, ${kitversion}, ${sendkitname} ${sendkitid}
attask.task.linkto.url=

In addition to the configuration file, the config_custom_tasks.xml must be set up properly. (See Custom Tasks)

This file may reside at the project level, group level and global level.

config_custom_tasks.xml

The config_custom_tasks.xml configuration file contains the specific stages where a plugin can be called. Dynamic information is available to the plugin through the LRM Context object (com.lingoport.lrm.customtask.LRMContext). The lrm-customtasktest.jar, located in the samples/CustomTask/ folder of your install directory, contains methods for testing out these different stages.

This file may reside at the project level, group level and global level.

config_email_global.xml

File config_email_global.xml is the configuration file for setting up the sender's email credentials for all emails that are sent by the LRM process. It is located in the global <HOME>/Lingoport_Data/L10nStreamlining/config folder.

The config_email_global.xml file is used by a project's Notifications Jenkins job in order to send out status emails. This Jenkins job is, by default, set to run once a week.

See Sending Emails for more information.

config_file_cherry_picker.xml

The config_file_cherry_picker.xml file is a template to be copied under the project config directory if needed.

It helps special situations where files to be sent for translation are far and few and possibly locale dependent. This should be used with care.

This file resides only at the project level but is moved into the project level when it is being used.

config_lingotek_api.properties

The config_lingotek_api.properties file is a configuration file that contains the lingotek api calls and should not be edited. It is used if the L10n vendor for a group/project is set to Lingotek (config_l10n_vendor.properties). Any edits made to this file may cause prep kits to fail when uploading to Lingotek.

This file resides only at the global level.

config_lingotek_file_format.properties

The config_lingotek_file_format.properties configuration file contains the file format mapping for uploading documents into Lingotek. It is used if the L10n vendor for a group/project is set to Lingotek (config_l10n_vendor.properties).

This file resides only at the global level.