Difference between revisions of "Project Configuration Files"

From Lingoport Wiki
Jump to: navigation, search
(Project Configuration Files)
(34 intermediate revisions by 3 users not shown)
Line 1: Line 1:
  +
=Location=
Under the L10n Streamlining directory (typically ~jenkins/Lingoport_Data/L10nStreamlining), each group file structure follows this pattern:
 
  +
Project Configuration Files are copied over to the ''L10nStreamlining/<group name>/projects/<project name>config'' folder when a project is created. The original configuration files are located in the ''../lingoport/lrm-server-xx/deploy/templates/dir_structure/project'' folder. These files can be moved to the group or global levels if less granularity is needed.
  +
  +
=Project Configuration Files=
  +
Under the L10n Streamlining directory (typically '''<HOME>/Lingoport_Data/L10nStreamlining'''), each group file structure follows this pattern:
   
 
<pre>
 
<pre>
 
<group_name>
 
<group_name>
 
├── config
 
├── config
   ├── config_due_dates.xml
+
├── config_due_dates.xml
   ├── config_file_cherry_picker.xml
+
├── config_l10n_vendor.properties
   ├── config_l10n_vendor.properties
+
├── config_lingotek_locale_mapping.properties
   ├── config_lingotek_locale_mapping.properties
+
├── config_lrm_info.properties
   ├── config_lrm_info.properties
+
├── config_pseudo_loc.xml
  +
│ ├── config_ws_locale_mapping.properties
│   └── config_pseudo_loc.xml
 
  +
│ └── config_ws_locale_projecttype_mapping.properties
 
└── projects
 
└── projects
 
└── <project 1>
 
└── <project 1>
 
├── config
 
├── config
   ├── config_email_recipients.xml
+
├── config_email_recipients.xml
   └── config_vcs.properties
+
└── config_vcs.properties
 
...
 
...
 
</pre>
 
</pre>
Each of the group configuration files can be copied to the project 'config' directory is a project has a configuration different from most projects in that group. For more information on the group configuration files, visit the [[Group Configuration Files]] page.
 
   
  +
Configuration files can be at the global, group or project level.
This section describes the configuration files for each project.
 
   
  +
'''Global''': <HOME>/Lingoport_Data/L10nStreamlining/config. For more information on the global configuration files, visit the [[Global Configuration Files]] page.
  +
  +
'''Group''': <HOME>/Lingoport_Data/L10nStreamlining/<group name>/config. For more information on the group configuration files, visit the [[Group Configuration Files]] page.
  +
  +
If there are duplicate files, the project level takes precedence, followed by the group level, and finally the global level.
 
== config_email_recipients.xml ==
 
== config_email_recipients.xml ==
The notification (email) mechanism uses this file to determine which emails are sent to what recipients.
+
The notification (email) mechanism uses this file to determine which emails are sent to what recipients. This is distinct from the config_email_global.xml file set up in the global directory.
  +
  +
More than one person can be specified in each section.
   
 
The file is formatted this way:
 
The file is formatted this way:
Line 50: Line 61:
   
 
== config_vcs.properties ==
 
== config_vcs.properties ==
This file tells what Version Control System to use and the URL of the repository project for checkin and checkout.
+
This file tells what Version Control System to use and the URL of the repository project for check-in and checkout.
 
A typical file looks like this:
 
A typical file looks like this:
 
<pre>
 
<pre>
Line 56: Line 67:
 
# - git
 
# - git
 
# - svn
 
# - svn
  +
# - tfs
VCS_TYPE=svn=
 
  +
# ( ftp)
  +
VCS_TYPE=NOTSET
   
# For GIT:
+
# For GIT
  +
# See http://wiki.lingoport.com/Git
# Uncomment the following and fill in the properties
 
  +
# ----------------------------------
#VCS_GIT_URL=git@github.com:githubUser/gitprojectname.git=
 
  +
#VCS_GIT_URL=git@github.com:userName/gitProjectName.git
#VCS_GIT_BRANCH=origin/master=
 
  +
#VCS_GIT_BRANCH=master
   
 
# For SVN
 
# For SVN
  +
# See http://wiki.lingoport.com/SVN
VCS_SVN_URL=https://svns.company.com/project/.../trunk/com.company.project=
 
  +
# ----------------------------------
  +
# VCS_SVN_URL=https://svns.company.net/repo/client/trunk/com.company.project.
  +
  +
# For TFS
  +
# See http://wiki.lingoport.com/TFS
  +
# --------------------------------
  +
# VCS_TFS_URL=
  +
# VCS_TFS_URL=http://company:port/tfs/
  +
# TF_SERVER_FOLDER=$/projectX/
  +
# TF_UNIQUE_WORKSPACE_NAME=AUniqueNameGeneratedFromSomeRandomGenerating
  +
## Optional -- associate with a tfs workitem
  +
# LINGOPORT_WORKITEM_ID=
   
 
</pre>
 
</pre>
   
  +
Please note that this file <b>must</b> be a good <b>Unix</b> file: If the file was copied from a Windows system, <code>dos2unix</code> should first be run on the file. Otherwise the bash scripts may misread the attributes.
Please note the two equal signs around each property!
 
  +
  +
After '''VCS_TYPE''' is set to a value other than NOTSET, uncomment the corresponding section and provide the correct information for the configuration.
  +
  +
== config_l10n_vendor.xml (Optional) ==
  +
This file is typically located at the Group level. However, if one project in the group needs a different way to move files back and forth with the translation team, it can be overwritten here.
  +
  +
When sending files for translation or getting files back from translation, the system uses '''<code>config_l10n_vendor.xml</code>'''. It can be set to use FTP, Lingotek, GlobalLink or Worldserver out of the box. More end points can be added for a custom implementation.
  +
  +
For more information see [[L10n_Vendors]]

Revision as of 22:47, 27 November 2018

Location

Project Configuration Files are copied over to the L10nStreamlining/<group name>/projects/<project name>config folder when a project is created. The original configuration files are located in the ../lingoport/lrm-server-xx/deploy/templates/dir_structure/project folder. These files can be moved to the group or global levels if less granularity is needed.

Project Configuration Files

Under the L10n Streamlining directory (typically <HOME>/Lingoport_Data/L10nStreamlining), each group file structure follows this pattern:

<group_name>
├── config
│   ├── config_due_dates.xml
│   ├── config_l10n_vendor.properties
│   ├── config_lingotek_locale_mapping.properties
│   ├── config_lrm_info.properties
│   ├── config_pseudo_loc.xml
│   ├── config_ws_locale_mapping.properties
│   └── config_ws_locale_projecttype_mapping.properties
└── projects
    └── <project 1>
        ├── config
        │   ├── config_email_recipients.xml
        │   └── config_vcs.properties
        ...

Configuration files can be at the global, group or project level.

Global: <HOME>/Lingoport_Data/L10nStreamlining/config. For more information on the global configuration files, visit the Global Configuration Files page.

Group: <HOME>/Lingoport_Data/L10nStreamlining/<group name>/config. For more information on the group configuration files, visit the Group Configuration Files page.

If there are duplicate files, the project level takes precedence, followed by the group level, and finally the global level.

config_email_recipients.xml

The notification (email) mechanism uses this file to determine which emails are sent to what recipients. This is distinct from the config_email_global.xml file set up in the global directory.

More than one person can be specified in each section.

The file is formatted this way:

<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<email-recipients>
        <notify-changes>
                <recipient>name1@company.com</recipient>
                <recipient>name2@company.com</recipient>
        </notify-changes>
        <prep-kit>
                <recipient>name@company.com</recipient>
        </prep-kit>
        <import-kit>
                <recipient>name1@company.com</recipient>
                <recipient>name2@company.com</recipient>
        </import-kit>
        <translators>
                <translator>name@company.com</translator>
        </translators>
        <l10nvendoradmins>
                <l10nvendoradmin>name@company.com</l10nvendoradmin>
        </l10nvendoradmins>
</email-recipients>

config_vcs.properties

This file tells what Version Control System to use and the URL of the repository project for check-in and checkout. A typical file looks like this:

# Choices for VCS_TYPE are:
#    - git
#    - svn
#    - tfs
#    ( ftp)
VCS_TYPE=NOTSET

# For GIT
# See http://wiki.lingoport.com/Git
# ----------------------------------
#VCS_GIT_URL=git@github.com:userName/gitProjectName.git
#VCS_GIT_BRANCH=master

# For SVN
# See http://wiki.lingoport.com/SVN
# ----------------------------------
# VCS_SVN_URL=https://svns.company.net/repo/client/trunk/com.company.project.

# For TFS
# See http://wiki.lingoport.com/TFS
# --------------------------------
# VCS_TFS_URL=
# VCS_TFS_URL=http://company:port/tfs/
# TF_SERVER_FOLDER=$/projectX/
# TF_UNIQUE_WORKSPACE_NAME=AUniqueNameGeneratedFromSomeRandomGenerating
## Optional -- associate with a tfs workitem
#   LINGOPORT_WORKITEM_ID=

Please note that this file must be a good Unix file: If the file was copied from a Windows system, dos2unix should first be run on the file. Otherwise the bash scripts may misread the attributes.

After VCS_TYPE is set to a value other than NOTSET, uncomment the corresponding section and provide the correct information for the configuration.

config_l10n_vendor.xml (Optional)

This file is typically located at the Group level. However, if one project in the group needs a different way to move files back and forth with the translation team, it can be overwritten here.

When sending files for translation or getting files back from translation, the system uses config_l10n_vendor.xml. It can be set to use FTP, Lingotek, GlobalLink or Worldserver out of the box. More end points can be added for a custom implementation.

For more information see L10n_Vendors