Sending Emails

From Lingoport Wiki
Revision as of 16:56, 7 December 2021 by Llawson (talk | contribs) (Additional Email Configuration)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

config_email_global.xml

File config_email_global.xml is the configuration file for setting up the sender's email credentials for all emails that are sent by the LRM process.

The config_email_global.xml file is used by a project's Notifications Jenkins job in order to send out status emails. This Jenkins job is, by default, set to run once a week.

There are 3 types of information contained in the config_email_global.xml file.

  • email configuration
  • interval between the sending of status emails
  • flag indicating whether to send out the 'No Files to Prep' email

Location of the global email configuration file

The default location for this file is the <HOME>/Lingoport_Data/L10nStreamlining/config folder. As with other LRM config files, this file can be moved to either the group's config folder (<HOME>/Lingoport_Data/L10nStreamlining/<group name>/config) or the project's config folder (<HOME>/Lingoport_Data/L10nStreamlining/<group name>/projects/<project name>/config) depending on the level of granularity required. For example, if a specific project requires a different email sender then is defined at the global level, then copy the global email config file to the project level and make the required changes.

Email Credentials Configuration

The email configuration consists of the following xml elements:

  • smtp-host - server that will send the email
  • smtp-auth - authentication mechanism, if applicable
    • mail.smtp.auth - smtp protocol with smtp authentication
    • mail.smtps.auth - smtps protocol with smtps authentication
    • none' - smtp protocol with no authentication
  • email-sender - valid email address
  • sender-password - not required

The first step in configuring the global email file is to verify, with your IT department, the mail server credentials. Send email command may be used to test the configuration values.

Example No Authorization Email Configuration

Test your email configuration using the -se command for no authorization.

   <smtp-host>smtp.gmail.com/<smtp-host>
   <smtp-auth>none</smtp-auth>
   <email-sender>joe@mycompany.com</email-sender>  
   <sender-password encrypted="false">mypassword</sender-password>

Example SMTP Authorization Email Configuration

Test your email configuration using the -se command for SMTP authorization.

   <smtp-host>smtp.gmail.com/<smtp-host>
   <smtp-auth>mail.smtp.auth</smtp-auth>
   <email-sender>joe@mycompany.com</email-sender>  
   <sender-password encrypted="false"></sender-password>

Example SMTPS Authorization Email Configuration

Test your email configuration using the -se command for SMTPS authorization.

   <smtp-host>smtp.gmail.com/<smtp-host>
   <smtp-auth>mail.smtps.auth</smtp-auth>
   <email-sender>joe@mycompany.com</email-sender>  
   <sender-password encrypted="false">mypassword</sender-password>

Additional Email Configuration

In addition, there are configuration settings for when to send out notification emails and whether or not to send out the 'No Files to Prep' email.

  • dashboard-url - Dashboard URL used as the link destination for the email Log In button
  • notify-changes-email-interval - By default, the Notification email interval is set to 1 (every day) and is also dependent on how often the Jenkins Notification job is run. If no notification email is desired then set the interval to a number > 365.
  • late-kits-email-interval - By default, the Late Prep Kits email interval is set to 1 (every day) but is dependent on the number of days late and on how often the Jenkins Notification job is run. If no late kit email is desired then set the interval to a number > 365.
  • number-days-late - By default, a prep kit is deemed late if it is 7 days late.
  • send-no-files-to-prep-email - By default, the No Files to Prep email will be sent out when there is a request to prep a kit but there are no files to prep. If a Jenkins job is created that automatically attempts to prep a kit, then this value should be set to 0 so that the email is not sent. Otherwise, the email recipient's inbox may be inundated with 'No Files to Prep' emails.

Encrypted Password

The <sender-password> can be configured with the encrypted attribute set to true, as in

         ...
         <email-sender>mailuser@company.com</email-sender>
         <sender-password encrypted="true">UUIasd455</sender-password>
         ...

To encrypt the password, use the encrypt command line on lrm-common.jar file. For instance:

> java -jar <LRM_INSTALLATION_PATH>/lib/lpcommon.jar --encrypt

which will prompt you for the text (here the password) to encrypt and will provide the result on the console.

Java Options for sending emails

It may be necessary to explicitly set the email port and/or STARTTLS flag rather than rely on the default mail server values. In addition, the email session debug mode can be enabled.

There are 3 email settings that may be set through java options:

  • Email Server Port
  • SMTP STARTTLS enabled
  • Email Session Debug mode enabled

Email Protocol Port Number

The expected java option for explicitly setting the protocol port number is:

  • mail.smtp.port

Linux example if setting java options within a shell session.

export _JAVA_OPTIONS='-Dmail.smtp.port=25'

Enable/Disable STARTTLS

The expected java option for explicitly enabling/disabling STARTTLS is:

  • mail.smtp.starttls.enable

Linux example if setting java options within a shell session.

export _JAVA_OPTIONS='-Dmail.smtp.starttls.enable=true'

STARTTLS is automatically enabled for the SMTPS protocol.

Enable Email Session Debug mode

The expected java option for explicitly enabling/disabling the email session debug mode is:

  • mail.debug.mode

Linux example if setting java options within a shell session.

export _JAVA_OPTIONS='-Dmail.debug.mode=true'

Send Email Command

The send email command is used to test sending an email using your mail server credentials. Before starting, verify with your IT department the mail server credentials otherwise errors will occur.

The send email command is accessed through the lpcommon.jar file and is located in the lib folder (i.e. ../lrm-server-x.x/lib). This command is used to test the configured mail server. Before running this command, you may want to enable the email session debug mode.

In order to run the send email -sse or --send-smtp-email command, you must specify an existing location for the error log.

In addition to the log file, there are 5 other required fields.

  • SMTP Host denoted by option -sh or --smtp-host
  • Senders email address denoted by option -es or --email-sender
  • Email Subject denoted by option -subj or --subject
  • Email Message denoted by option -msg or --message
  • Email Recipients denoted by option -r or --recipients

Sending Email with SMTP protocol and no authorization

To test sending an email using the SMTP protocol with no authorization run the following command:

java -jar lpcommon.jar -sse -lf /var/lib/jenkins/test/error.log -sh smtp.gmail.com -es myemail@mycompany.com -subj test -msg "This is a test" -r anotheremail@email.com

In looking at the console log you should see the following:

  • Email protocol is `smtp` (which is the default)
  • Authorization `mail.smtp.auth` is set to `false`

If errors occurs then you'll need to change your email send options. For error examples see Email Error Messages.

Sending Email with SMTP authorization

To test sending an email using the SMTP protocol with SMTP authorization run the following command:

java -jar lpcommon.jar -sse -lf /var/lib/jenkins/test/error.log -sh smtp.gmail.com -sa mail.smtp.auth -es myemail@mycompany.com -subj test -msg "This is a test" -r anotheremail@email.com

In looking at the console log you should see the following:

  • Email protocol is `smtp`
  • Authorization `mail.smtp.auth` is set to `true`

If errors occurs then you'll need to change your email send options. For error examples see Email Error Messages.

Sending Email with SMTPS protocol

To test sending an email using the SMTP protocol with SMTP authorization run the following command:

java -jar lpcommon.jar -sse -lf /var/lib/jenkins/test/error.log -sh smtp.gmail.com -sa mail.smtps.auth -es myemail@mycompany.com -subj test -msg "This is a test" -r anotheremail@email.com -ep mypassword

In looking at the console log you should see the following:

  • Email protocol is `smtp` (which is the default)
  • Authorization `mail.smtp.auth` is set to `false`

If errors occurs then you'll need to change your email send options. For error examples see Email Error Messages.

Error Messages

The first step in trouble shooting any email messages is to verify, with your IT department, the mail server credentials.

If you're unable to send an email successfully then you may want to enable the debug mode for the email session. This will provide additional information regarding the progress of the session. Set the debug mode through java options. After enabling the debug mode, the error messages should provide explicit information regarding the reason for the failure. There are a few error messages that may not be so obvious. These are:

  • Connection is not successful due to invalid port number:
The default port number will be used when setting up the connection. If you're unable to change the default port number then you'll need to explicitly set it via java options.
  • Must issue a STARTTLS command first. This error indicates that STARTTLS must be enabled. This error occurs when the protocol is SMTP. You can attempt to fix this error by:
Setting the authorization to SMTPS (connection may require a password)
or
Explicitly setting STARTTLS through the java option mail.smtp.starttls.enable and adding the password to the command line (-ep)