LRM Commands Reference
Contents
Introduction
To invoke a command, you must type java -jar <path-to-jarfile> -command -parameters
For instance, on Linux, if the Lingoport Resource Manager Command Line Interface jar file is located under ~/lingoport/lrm-server-2.0 (the default location) and you want to list the Resource Manager projects, you would type:
java -jar ~/lingoport/lrm-server-2.0/lrm-cli.jar --list-projects
Each command also has an abbreviation. The long version of each command starts with two dashes, --. The short version of each command starts with one dash, -.
For example, the previous example could have been written:
java -jar ~/lingoport/lrm-server-2.0/lrm-cli.jar -lp
To Note
The help provides a list of all available commands. The debug and the verbose flags can be applied to all commands.
-d,--debug Log4j Debug mode
-v,--verbose Verbose (console logging)
-h,--help Displays Help.
Reference
This reference gives the short and the long version of each Resource Manager command and a usage example.
-ak,--activate-kit Activate a kit. Example: lrm-cli.jar -ak
--project-name MyProject --kit-version 2
-au,--add-user Add a user. Example: lrm-cli.jar -au
--new-name MyName --new-password
MyPassword
-cp,--create-project Create a project from an xml file.
Example: lrm-cli.jar -cp -f
C:/MyLocation/Setup.xml
-d,--debug Log4j Debug mode
-dk,--deactivate-kit Deactivate a specific kit. Example:
lrm-cli.jar -dk --project-name MyProject
--kit-version 2
-dp,--delete-project Delete a project. Example: lrm-cli.jar -dp
--project-name MyProject
-dr,--dry-run Optional argument for --prep-kit. Runs
--prep-kit without altering the database.
-ep,--export-project Export the project into an xml file. If
option `-f` is not specified then the xml
file is saved to the default report
directory. Example: lrm-cli.jar -ep
-f <string> Location of file (-f C:/MyLocation) or
file name with path (-f
C:/myfolder/myfile.xml)
-h,--help Displays Help.
-ii,--import-issues Report on all the active import issues.
Example lrm-cli.jar -r -ii -pn
MyProjectName
-ik,--import-kit Import the translated kit. Example:
lrm-cli.jar -ik -pn MyProject -f
C:/KitLocation
-ks,--kit-status Report on all the incomplete and complete
kits. Example lrm-cli.jar -r -ks -pn
MyProjectName
-ksi,--kit-status-incomplete Report on all the incomplete kits. Example
lrm-cli.jar -r -ksi -pn MyProjectName
-kv,--kit-version <number> Specifies the kit version id when
activating or deactivating a kit.
-lp,--list-projects Lists all the projects to the console.
Example: lrm-cli.jar -lp
-nn,--new-name <string> Specifies either the new project name when
renaming a project (-rp) or the user name
when adding a user (-au).
-np,--new-password <string> Specifies the password when adding a user
(-au).
-p,--password <string> Optional argument used to log into the LRM
system as a different user than indicated
in the LrmUserConfig.xml file.
-pi,--project-inspect Report on all the files that were found
using the project definition for the
supplied project name. Example:
lrm-cli.jar -r -pi -pn MyProjectName
-pk,--prep-kit Prep a kit. Example: lrm-cli.jar -pk
--project-name MyProject
-pn,--project-name <string> Specifies the project name.
-ps,--project-status Report on the productivity and status of
the supplied project name. Example
lrm-cli.jar -r -ps -pn MyProjectName
-r,--report Run a report that is specified by an
additional option. If option `-f` is not
specified then the report is saved to the
default report directory. Example:
lrm-cli.jar -r <report option>
-rp,--rename-project Rename a project. Example: lrm-cli.jar -rp
--project-name projectName --new-name
NewName
-si,--source-issues Report on the source issues for the
supplied project name. Example:
lrm-cli.jar -r -si -pn MyProjectName
-u,--user <string> Optional argument used to log into the LRM
system as a different user than indicated
in the LrmUserConfig.xml file.
-up,--update-project Update a project from an xml file.
Example: lrm-cli.jar -up -f
C:/MyLocation/Setup.xml
-v,--verbose Verbose (console logging)
Commands to Know
There are a few commands which are useful for getting started and debugging issues.
To make things easier, set up an alias for the command. The examples below will be using the lrm alias
On Unix:
alias lrm='java -jar ~/lingoport/lrm-server-2.0/lrm-cli.jar'
lrm --version
In Windows:
set "LRM=java -jar C:\Lingoport\LRM-Server-2.0\lrm-cli.jar"
%LRM% --version
Create a project
lrm --create-project -f <path to proj.xml file>
For example:
lrm -cp -f projects/MyProject.xml
The -f is the location of the project description file. The project description file must contain a <group-name> stanza and a <project-name> stanza otherwise the creation will fail.
<project-name>MyProject</project-name>
<group-name>Blue</group-name>
<project-desc>This project contains resource files of all types for baseline testing</project-desc>
<top-level-dir>Lingoport\test\MyProject\resources\</top-level-dir>
<target-locales
<locale>de_DE</locale>
<locale>fr_FR</locale>
<locale>zh_CN</locale>
</target-locales>
To see if there are multiple groups:
lrm --list-groups
To create a project when there are multiple groups use the -gn option. The group must match that in the MyProject.xml file.
lrm -cp -f projects/MyProject.xml -gn <group-name>
To verify that the project was created in a group. If there is only one group the -gn is optional:
lrm -lp -gn <group-name>
Create a group
When creating a group, you must have the license associated with the group. Sometimes, the group is referred to as the company. These terms in Lingoport Resource Manager are interchangeable. If you do not have a license, contact support@lingoport.com. With the license you will have the following information:
- The group name (-gn)
- The number of licenses (-nl) - this determines how many projects you can create under this group.
- The expiration date (-dt)
- The license key (-lkey) - a 10-digit code provided by Lingoport
lrm --create-group --group-name <group-name> --number-of-licenses <number of licenses> --date <expiration-date> -license-key <license key>
For example:
lrm --create-group -gn Blue -nl 10 -dt 2016-12-31 -lkey 1234567890
To verify that the group was created successfully, use the --list-groups option. This will show the options used to create the group.
lrm -lg
Name Max Project Exp Date Days Left
Blue 10 2016-12-31 452
Process completed successfully.
Update a license
If the expiration date for a license passes or there are more projects than the licensed number, a new license can be generated. Contact support@lingoport.com to get a new license. Just like when creating a new group, the following information is needed. The license key will be different than the one previously issued by Lingoport.
- The group name (-gn)
- The number of licenses (-nl) - this determines how many projects you can create under this group.
- The expiration date (-dt)
- The license key (-lkey) - a 10-digit code provided by Lingoport
lrm --update-license -gn <group-name> -nl <number of licenses> -dt <expiration date> -lkey <license key>
For example:
lrm -ul -gn Blue -nl 100 -dt 2016-12-31 -lkey 9987654321
To verify the change, use the --list-groups command
lrm -lg
Name Max Project Exp Date Days Left
Blue 100 2016-12-31 452
Process completed successfully.
Update a project
After creating a project, there may be times when you want to change some of the LRM options and resources. To update the options:
- Export the project to create the ProjectDefinition.xml file
- Modify the ProjectDefinition.xml file
- Inspect the project to verify the changes.
- Update the project to use the new changes.
First, export the project. This will create a file ProjectDefinition.xml in your reports area. The default location for the reports directory is ~/Lingoport_Data/LRM/<group-name>/reports/<project>. The -f option can be used to create the ProjectDefinition.xml file in a different location. The --group-name is optional if there is only one group defined.
lrm --export-project --project-name <project> --group-name <group-name>
For example:
lrm -ep -pn MyProject -gn Blue
or
lrm -ep -pn MyProject -f /var/tmp -gn Blue
Next, modify the ProjectDefinition.xml file. The file can be modified to detect or skip various errors, which target locales to create and define the resources and their extensions. The file can also be modified to exclude various files in the search.
To verify the changes, run a Project Inspection report. This creates ProjectInspect_xx_YY.xml (where xx_YY are locale identifiers) files in the default location at ~/Lingoport_Data/LRM/<group-name>/reports/<project>. The -f option can be used to create the ProjectInspect_xx_YY.xml files in a different location. The --group-name is optional if there is only one group defined.
lrm --report --project-inspect --project-name <project> --group-name <group-name>
For example:
lrm -r -pi -pn MyProject -gn Blue
or
lrm -r -pi -pn MyProject -f /var/tmp -gn Blue
Finally, update the project using the --update-project option.
lrm --update-project -f <location of ProjectDefinition.xml>
For example:
lrm -up -f Lingoport_Data/LRM/<group-name>/reports/<project>/ProjectDefinition.xml
or
lrm -ep -pn MyProject -f /var/tmp/ProjectDefinition.xml
Delete project
A project can be deleted if no prep kits have been created. The -gn flag is optional if there is only one group defined.
lrm --delete-project --project-name <Project>
For example:
lrm -dp -pn MyProject -gn Blue
Create reports
A number of LRM commands will create reports.
