Systems Configuration

The conponents of the Lingoport Suite are covered in the Lingoport Suite Introduction section. That section should be reviewed before installation.

The Lingoport Suite can be configured in a variety of ways. The following describes our recommended configuration for a Continuous Globalization System, where both internationalization and localization progress is tracked, managed and displayed in an automated and reliable process.

Important Note : The Dashboard System and the Continuous Globalization system can be the same machine. This is the most frequent deployment scenario. It is recommended that this configuration be installed with the Stack Installer. The same machine can also host the Globalyzer Server.

To see more deployment scenarios, please refer to Deployment Scenarios . Make sure to choose a deployment scenarios with the IT department before starting the installation.

IT Participation

The customer IT group is very important to the successful deployment of the Lingoport applications. In particular, the IT group that sets up the Linux system must understand the usage model for the system. Lingoport requires a meeting with the parties responsible for setting up and maintaining the host system before installation can properly begin. The hope is that once the system is setup for installation, minimal IT interaction is necessary.

Stack Installer

The Lingoport Suite server components can be installed using the Stack Installer which automates the installation and configuration of the central system.

Preparations must be made with the IT team to ensure that all prerequisites are met before installation. For new installations, this is the recommended method to use to verify that all the various actors work together well.

Hardware & Software Requirements

The following sections describe the hardware and software requirements for each piece of the Lingoport Suite applications.

Globalyzer Server

The Globalyzer Server is where all your Globalyzer account information and rule sets are stored. Lingoport's hosted server is at www.globalyzer.com

The following table lists the system specifications for installing the Globalyzer Server on a dedicated Linux machine. The disk size assumes that the database is also installed on the machine; it could be less if the database is on a separate server. If the server machine is running more than the Globalyzer Server, we recommend increasing CPU and memory.

Hardware requirements

Element	Recommended	Up to
CPU	2	4
Memory	8 GB	16 GB
Disk	160 GB	500 GB

Software requirements

The current versions of these software products can be found at: Current versions of Lingoport products and supporting applications

Software	Recommended
Operating System	Linux, CentOS
Java Standard Edition	Java JDK
MySQL Database	MySQL
Web Server	Tomcat

Lingoport Continuous G11n Server

The current versions of these software products can be found at: Current versions of Lingoport products and supporting applications.

Access and Ports

Jenkins need to be accessible by Lingoport and customer personnel to configure jobs, check the console if any problem arise, run jobs if necessary. The Dashboard needs to be accessible by many actors, including customer development teams, management, and QA, Lingoport, Translation Vendors.

The following describes what needs to be open and accessible on the deployed system.

Ports

Jenkins is accessed via port 8080
Lingoport Dashboard is accessed via port 9000
The Translation Vendor may be accessed by different means, for instance port 21 for FTP or port 22 for SFTP.
Access for the Lingoport (or internal) installation team can be done in many ways, such as SSH for Telnet or Putty.
The system must be able to access https://globalyzer.com.
The system must be able to access the code repository, such as http://github.com for instance.

Other aspects

Jenkins installation requires access to the Jenkins update site, http://updates.jenkins-ci.org
Dashboard may require access to the SonarQube update site, http://update.sonarsource.org
Notifications are sent using an SMTP account: The system must allow access to an SMTP server (e.g. Google)
For a Master/Slave configuration of Jenkins, see Node Installer.

Installation and Upgrade Order

Installing with the Stack Installer

For a new system, it is recommended to install using the Stack Installer which will configure the pieces of the Continuous Globalization System and Dashboard System to work together seamlessly.

Here are the installation steps.

Get the Stack Installer zip file and put it on the new server in the home directory of a user with root access.
Login to the console on the system as the user with root access.
Unzip the Stack Installer zip file.
A new machine might not have the unzip command installed. To get the unzip command: sudo yum install unzip

unzip stack-installer.zip

cd stack-installer
Edit the configuration files to automate the process.
Edit login-info.conf. Here is an example:

# Globalyzer Login details
GLOBALYZER_USER="name@acmeco.com"
GLOBALYZER_PASS="abcdef"
GLOBALYZER_SERVER="https://www.globalyzer.com/gzserver/"

# Server Address or IP - the server this is being installed on
SERVER_URL_OR_IP="my.company.com" # Alternately "http://some.domain.com"

# Lingoport/LRM MySQL user - probably doesn't need to be changed
LINGOPORT_MYSQL_USER="lingoport"
LINGOPORT_MYSQL_PASS="lingopwd"

# Lingoport Dashboard MySQL user - probably doesn't need to be changed
DASHBOARD_SONAR_USER="lingodashuser"
DASHBOARD_SONAR_PASS="lingodashpass"

Manual installation and upgrade

The following is the manual method to install the Lingoport Suite.

The customer IT group needs to have decided on which deployment scenario to follow.

The Deployment Scenarios define and use several components

The Globalyzer Server is where your Account and Rule Set information are stored. Lingoport provides the Globalyzer Server at www.globalyzer.com. However, depending on licensing, you may install the server on your own system.
The Dashboard System is where you view internationalization and localization status of your projects in a sonar-powered dashboard. It contains the MySQL database for Dashboard as well as the scripts to start the Dashboard Server process.
The Continuous Globalization system is where you install many of the Lingoport Suite applications. It is the heart of the installation, since this is where the automation occurs that keeps globalization status up-to-date. It needs to run the Dashboard client, Globalyzer client, and LRM scripts on the latest source code. The Dashboard scripts will call the Globalyzer Client to scan the source code for internationalization issues and will call LRM to check for localization status, and then it will push those results to the Dashboard Server. Jenkins is used to automate many of the operations.
The individual Developer Machine is where you install Globalyzer Clients so that internationalization and localization issues can be addressed.

When you have decided on one of the Deployment Scenarios, be sure to follow this order:

Install/Upgrade the Globalyzer Server if not using Lingoport's Globalyzer Server. Need link
Install/Upgrade the Globalyzer Client and/or Workbench on the Continuous Globalization system Need link
Install/Upgrade the Globalyzer Client and/or Workbench on the Developer Machine. Different clients may be installed on development machines depending on project responsibilities. Need link
Install/Upgrade the LRM Server on the Continuous Globalization system
Install/Upgrade the Dashboard Server on the Dashboard System.
Install/Upgrade the Dashboard Client on the Continuous Globalization system.

IGNORE FOLLOWING TEXT

When installing or upgrading the Globalyzer Suite, be sure to follow this order:

Install Jenkins: Make sure you know which user will execute the Jenkins job and have access to repositories.
Install/Upgrade the Globalyzer Server: Follow the instructions in the Globalyzer_Server_Setup&Admin_<version>.doc file included with the *Globalyzer Server installation files.
Install/Upgrade the Globalyzer Client: Log in to the Globalyzer Server and click on the Client download link at the bottom of the page. The Jenkins user must have access and permissions to the location of the client.
Install/Upgrade the LRM Server: Follow the instructions in the LRM Installation Guide HTML file included with your LRM installation files. The Jenkins user must have access and permissions to the location of the server files. (Note: There are no LRM clients)
Install/Upgrade the Dashboard Server: Follow the instructions in the Dashboard Installation Guide HTML file included with your Dashboard installation files.
Install/Upgrade the Dashboard Client: Follow the instructions in the Dashboard Installation Guide HTML file included with your Dashboard installation files. The Jenkins user must have access and permissions to the location of the client.
Configure Jenkins with tabs, the jobs, the users, and the authorizations

The Globalyzer Server

The Globalyzer Server is where your Account and Rule Set information are stored. Lingoport provides the Globalyzer Server at www.globalyzer.com. However, depending on licensing, you may install the server on your own system. Follow the detailed installation instructions that come with your Globalyzer Server installation files, especially the Globalyzer_Server_Setup&Admin_<version>.doc file.

The Globalyzer Client/Workbench

The Globalyzer Client/Workbench should be installed on two locations, #The Build Server and #The Developer Machine.

The Client should be installed on the Build Server once a Globalyzer Server is usable (This may be your own internal server, or www.globalyzer.com. This is a good test that you can connect to the Server, and that the server is working.

The Client may be installed on the Developer Machine anytime after the server has been set up. It is not dependent on any of the other Lingoport Suite installation steps. You may still wish to complete the installation of the rest of the Suite first, however.

Installing on #The Build Server

From #The Build Server you will be using, log in to the Globalyzer Server and click on the Client download link at the bottom of the page. If you have not configured your own Globalyzer Server, use www.globalyzer.com. Follow the instructions on the download page.

If Jenkins is already installed on the build server, install the Globalyzer Client somewhere that the 'jenkins' user can access (or install it as the jenkins user). If not don't worry about it for now.
For the Client's database, you may use either MySQL or HSQLDB. If choosing MySQL, you must have MySQL 5.6 or greater installed
If making the install accessible to Jenkins, install the optional installation packages (Globalyzer Command Line Client, Globalyzer Ant Tasks). Jenkins will need to use these.
- Otherwise, you can install the workbench again as 'jenkins' later.

Once the Workbench is installed, follow the instructions on the install page to start it. A login prompt will open. If you've installed the Globalyzer Server internally, open the "Connections" tab and change the server URL to point to your Globalyzer Server. Enter your credentials and attempt to log in.

If the login is successful, and Globalyzer opens without any error dialogues, then this indicates that the Globalyzer Server is working properly. If you've installed the Globalyzer Server internally, well done! Otherwise, this is still useful confirmation that you can connect to and use www.globalyzer.com.

If the login is not successful, then you'll need to troubleshoot why. It's probably best to double check your login and connection information before proceeding into deeper troubleshooting.

Installing on #The Developer Machine

Insure #The Developer Machine has the pre-requisites as listed.

Log in to the Globalyzer Server (either www.globalyzer.com or your own internal server) and click the Client download link at the bottom of the page. Read and follow the instructions. You may install with any configuration described.

The Dashboard Server System

The Dashboard Server System is where you view internationalization and localization status of your projects in a sonar-powered dashboard. It contains the MySQL databases for both Dashboard and LRM as well as the scripts to start the Dashboard Server. In this configuration, we have separated the client applications from the server applications, though they are often combined on a single machine.

Install MySQL 5.6 or greater.
Install Java 7 JRE or greater.
Install the Dashboard Server. See the Dashboard Installation for details.

The Build Server

The Build Server is where you install many of the Lingoport Suite applications. It is the heart of the Continuous Globalization system, since this is where the automation occurs that keeps globalization status up-to-date. We call it the Build Server to distinguish it from a Developer machine and to imply that it could have source code for multiple applications, but it does not need to actually build executables. It just needs to run the Dashboard, Globalyzer, and LRM scripts on the latest source code. The Dashboard scripts will call the Globalyzer Client to scan the source code for internationalization issues, LRM to check for localization status, and then it will push those results to the Dashboard Server.

Starting with LRM 2.0, Jenkins, a continuous integration tool, is required. In addition to support for nightly scanning and scheduled Dashboard updates, Jenkins scripts are added as part of its LRM configuration that result in round-trip automation in the management of resource files.